Autotrol Water Softeners
Autotrol Water Softeners demand, or metered, highly efficient water softener. Logix 760 Demand Features:
Economical electronic demand.
Easy to set-up and use.
Program settings to the hardness of your water and size of tank.
Automatic capacity calculations.
Logix 760 Demand Water Softener
Add a Bypass Valvee for $39.00
Autotrol water softeners produce soft, smooth and silky water for just pennies a day. And soft water greatly reduces the scaling of pipes, faucets, pots, glasses, tubs, etc. You will use less laundry soap, dish washing soap, hand soap, etc. And softened water is more pleasant to wash with, less soap scum.
Glass shower doors are virtually spotless without the use of harsh and expensive cleaners and squeegees. So the clean freak in your home will love it.
NOTE: For flow rates in excess of 15 GPM, you can upgrade to a high flow rate controller for an additional $50.
*Cabinet model dimensions are 36″x22″x14″
Do you have a private well? Do you want to do a private well flow rate check? Here are the instructions:
WELL WATER FLOW RATE TEST
1. Go to the nearest faucet you can find AFTER the pressure tank. It is best if you can find a faucet that is placed where you can also hear the pump turn on and off. If you have not got a faucet where you can hear the pump turn off and on you may need some one near the pump to shout to you when they hear the pump come on and off.
Turn the faucet on and run water. The instant the pump turns on, turn the faucet off and time how many seconds the pump run before it turns itself off. Then write the number of seconds down. That is step 1.
2. Then you will start drawing water in a container that you can measure how many of gallons of water you have, such as a five gallon bucket or a one gallon container such as a plastic milk container. You simply draw water until the pump starts again. At the instant the pump starts again you will stop drawing water and make a note of exactly how many gallons (and partial gallons) you collected before the pump came on again. We will use the seconds and gallons you have recorded to determine your flow rate. For example: If you had the pump run initially for 30 seconds and then later were able to draw 5 gallons we would know your flow rate is 10 GPM.